ERROR CODE EXPLAINED
Amana Dryer
Amana Dryer F3 E2 Error Code
What it means
Amana indicates F3 E2 is a moisture-sensor issue that can occur after five consecutive loads are dried without moisture-sensor data being registered.
Try this first
- Press Power to clear the F3 E2 code and allow the dryer to restart.
- Check whether the dryer is level; an unlevel dryer can prevent clothing from contacting the moisture sensors correctly.
- Adjust the dryer feet if needed to level the machine.
- Very small loads or single items may not contact the moisture sensors reliably.
- Try a larger load or use an Automatic cycle rather than a Timed Dry cycle for the moisture-sensor check.
- If the problem persists, perform the manufacturer's power-cycle procedure.
- Turn off the dryer circuit breaker or breakers for 1 minute.
- Turn the circuit breaker or breakers back on.
- Start a Timed Dry cycle.
- Monitor the dryer for 1 minute to make sure the error code does not return.
- If F3 E2 continues after these checks and the power cycle, the manufacturer recommends service.
Can I keep using it?⚠ F3 E2 involves moisture-sensor data and can also be affected by dryer level or very small loads
Repair usually required?⚠ Check load contact and dryer level before escalating to service
If the error keeps returning
Follow the linked Amana Product Help moisture-sensor checks and arrange service if F3 E2 persists.
Official source
Troubleshooting information verified against manufacturer support documentation.
View manufacturer support page →Safety note:ApplianceSignal provides general troubleshooting information. Always follow the appliance manufacturer's safety instructions and disconnect power when required.