ERROR CODE EXPLAINED
Amana Dryer
Amana Dryer L2 Error Code
What it means
Amana identifies L2 as low or no line voltage that can prevent the dryer's heater from turning on.
Try this first
- Check that both household circuit breakers serving the electric dryer are not tripped.
- Confirm the dryer has the required 240-volt supply and that the power cord is properly installed.
- Unplug the dryer before checking terminal screws at the dryer.
- Turn the dryer circuit breaker(s) off for 5 minutes.
- Restore power at the circuit breaker(s).
- Start a Timed Dry cycle.
- Monitor the dryer for 5 minutes to make sure L2 does not return.
Can I keep using it?Correct the household power-supply problem before relying on dryer heat.
Repair usually required?If the supply checks do not correct L2, a qualified electrician or appliance service may be required.
If the error keeps returning
Use the linked official Amana Product Help article for the manufacturer procedure.
Official source
Troubleshooting information verified against manufacturer support documentation.
View manufacturer support page →Safety note:ApplianceSignal provides general troubleshooting information. Always follow the appliance manufacturer's safety instructions and disconnect power when required.