ERROR CODE EXPLAINED

Amana Dryer

Amana Dryer PF Error Code

← Back to Error Search

What it means

Amana identifies PF as a power failure that interrupted the drying cycle.

Try this first

  1. Touch and hold START to restart the dryer cycle, or press POWER to clear the display.
  2. If a recent power outage occurred, turn the household dryer circuit breaker off for 5 minutes.
  3. Restore the circuit breaker.
  4. Monitor the dryer for 5 minutes and verify normal operation.
Can I keep using it?Clear the power-failure condition and confirm normal dryer operation.
Repair usually required?Appliance repair is not the first action for a one-time PF caused by a power interruption; investigate further if the code keeps returning without a known outage.

If the error keeps returning

Use the linked official Amana Product Help article for the manufacturer procedure.

Official source

Troubleshooting information verified against manufacturer support documentation.

View manufacturer support page →
Safety note:ApplianceSignal provides general troubleshooting information. Always follow the appliance manufacturer's safety instructions and disconnect power when required.

More Amana Dryer Codes

AFAmana identifies AF / Check Vent as a restricted-airflow condition caused by a clogged lint screen or vent, or by venting that is crushed, kinked, or has too many turns.F4 E3Amana indicates F4 E3 means restricted airflow. The lint screen or vent may be clogged, or the vent may be crushed, kinked, or have too many turns.L2Amana identifies L2 as low or no line voltage that can prevent the dryer's heater from turning on.ERRAmana indicates ERR means the dryer door has not been completely closed and latched; the dryer will not run unless the door is closed.
View all Amana Dryer codes →
← Look up another error code

Amana Dryer PF: Quick Answer

What it means: Amana identifies PF as a power failure that interrupted the drying cycle.

First thing to check

Touch and hold START to restart the dryer cycle, or press POWER to clear the display.

Can I keep using it?

Clear the power-failure condition and confirm normal dryer operation.

Repair outlook

Appliance repair is not the first action for a one-time PF caused by a power interruption; investigate further if the code keeps returning without a known outage.

If the code remains

Use the linked official Amana Product Help article for the manufacturer procedure.

Model note: Error-code meanings and procedures can vary by model and model year. Confirm the code against the documentation for your exact appliance before replacing parts.

Manufacturer reference: producthelp.amana.com

Related Amana Dryer Error Codes

Check these other Amana Dryer codes if the display changes or you are comparing similar faults.

LocL2FC E1F78F77F76F75F74F73F72F71F70F50F31F30F29
All Amana Dryer Error CodesAll Amana Appliance Error Codes

More Amana Appliance Guides

Dishwasher36 codesFront Load Washer11 codesMicrowave47 codesRange / Wall Oven11 codesRefrigerator6 codesTop Load Washer64 codes
About these guides:SourcesHow content is organizedCorrectionsSafety