ERROR CODE EXPLAINED
Beko Dishwasher
Beko Dishwasher P1 / E01 Error Code
What it means
E01 (shown with the P1 overflow indication) means the dishwasher detected too much water or a leak and is attempting to discharge the water.
Try this first
- First check and clean the dishwasher filters, the drain-hose outlet and drain connection, and the traps under the sink for obstructions.
- Turn the dishwasher off at the wall.
- Pull the unit out of the cabinet and tilt it backward no more than 45 degrees; water may drain from the machine.
- Return the dishwasher to position, restore power, and check whether it operates normally.
Can I keep using it?Follow the manufacturer checks that match the condition shown by the appliance; model-specific details can vary.
Repair usually required?If the manufacturer directs the issue to service or the listed checks do not clear it, arrange professional appliance service.
If the error keeps returning
Use the linked official manufacturer support article for the exact source guidance and model-specific details.
Official source
Troubleshooting information verified against manufacturer support documentation.
View manufacturer support page →Safety note:ApplianceSignal provides general troubleshooting information. Always follow the appliance manufacturer's safety instructions and disconnect power when required.