ERROR CODE EXPLAINED
Bosch Dishwasher
Bosch Dishwasher E24 Error Code
What it means
The dishwasher detected a drainage problem involving the drain pump, pump cover, drain hose, or air gap.
Try this first
- Check and clean the drain pump area.
- Make sure the drain pump cover is correctly installed.
- Check the drain hose for kinks or sharp bends.
- Check the air gap and drain hose for debris.
- Run a rinse cycle after correcting any blockage.
Can I keep using it?⚠ Troubleshoot before continuing
Repair usually required?⚠ Usually not if caused by blockage
If the error keeps returning
If E24 remains after the drain system is cleaned and the dishwasher is reset, Bosch recommends contacting support.
Official source
Troubleshooting information verified against manufacturer support documentation.
View manufacturer support page →Safety note:ApplianceSignal provides general troubleshooting information. Always follow the appliance manufacturer's safety instructions and disconnect power when required.