Search Another Code
ERROR CODE EXPLAINED

Bosch Slide-In Range

Bosch Slide-In Range F5 Error Code

← Back to Error Search

What it means

Hot cookware is too close to the control panel and the electronics are at risk of overheating.

Try this first

  1. Remove hot cookware from the control-panel area.
  2. Allow the controls and electronics to cool.
  3. Wait a few seconds.
  4. Touch a control after the message clears.
  5. Keep hot cookware away from the control panel during use.
Can I keep using it?⚠ Move hot cookware away from controls
Repair usually required?✅ Usually no

If the error keeps returning

If F5 appears without hot cookware near the controls, further diagnosis may be required.

Official source

Troubleshooting information verified against manufacturer support documentation.

View manufacturer support page →
Safety note:ApplianceSignal provides general troubleshooting information. Always follow the appliance manufacturer's safety instructions and disconnect power when required.

More Bosch Slide-In Range Codes

dEThe range is operating in Demo Mode, so the cooking zones will not heat.E9000The range detected that the incoming supply voltage is outside the normal operating range.E9010The range detected that the incoming supply voltage is outside the normal operating range.E9011The range detected that the appliance is not connected correctly to the electrical supply.
View all Bosch Slide-In Range codes →
← Look up another error code

Bosch Slide-In Range F5: Quick Answer

What it means: Hot cookware is too close to the control panel and the electronics are at risk of overheating.

First thing to check

Remove hot cookware from the control-panel area.

Can I keep using it?

Move hot cookware away from controls

Repair outlook

Usually no

If the code remains

If F5 appears without hot cookware near the controls, further diagnosis may be required.

Model note: Error-code meanings and procedures can vary by model and model year. Confirm the code against the documentation for your exact appliance before replacing parts.

Manufacturer reference: bosch-home.com

Related Bosch Slide-In Range Error Codes

Check these other Bosch Slide-In Range codes if the display changes or you are comparing similar faults.

F4F6F2F8 + H/hF1U400E9011E9010E9000E7015dE
All Bosch Slide-In Range Error CodesAll Bosch Appliance Error Codes

More Bosch Appliance Guides

Cooktop / Rangetop22 codesCountertop Espresso Machine1 codeDishwasher55 codesDryer16 codesFreestanding Range8 codesHome Connect App29 codesOven / Microwave1 codeRefrigerator4 codesUnlimited Cordless Vacuum7 codesWasher35 codes
About these guides:SourcesHow content is organizedCorrectionsSafety