APPLIANCE TROUBLESHOOTING
Irobot Roomba s Series Robot Vacuum Error Codes
Find plain-language explanations for IrobotRoomba s Series Robot Vacuum error codes, common causes, and troubleshooting steps you can try before requesting repair service.
34 error codes currently available
Charging Error 1
Charging Error 1 means the robot does not detect a battery.
View error details →
Charging Error 101
Charging Error 101 means the robot does not detect a battery.
View error details →
Charging Error 102
Charging Error 102 means a charging over-current fault has been detected.
View error details →
Charging Error 103
Charging Error 103 means the robot detected a charging-system fault.
View error details →
Charging Error 104
Charging Error 104 means no electrical current has been detected with the dock or robot.
View error details →
Charging Error 105
Charging Error 105 means low electrical current has been detected with the dock or robot.
View error details →
Charging Error 106
Charging Error 106 means the battery is too warm for charging.
View error details →
Charging Error 107
Charging Error 107 means the battery is too cold for charging.
View error details →
Charging Error 109
Charging Error 109 means a battery failure has been detected.
View error details →
Charging Error 11
Charging Error 11 means a battery hardware failure has been detected.
View error details →
Charging Error 110
Charging Error 110 means the battery cells are imbalanced and all cells will not reach full charge.
View error details →
Charging Error 111
Charging Error 111 means a battery hardware failure has been detected.
View error details →
Charging Error 114
Charging Error 114 means the battery has an internal failure.
View error details →
Charging Error 115
Charging Error 115 means a battery cell failed during charging.
View error details →
Charging Error 117
Charging Error 117 means the robot may not recognize the battery as an authentic iRobot battery.
View error details →
Charging Error 119
Charging Error 119 means charging timed out.
View error details →
Charging Error 120
Charging Error 120 means the battery has a fault or is not ready to charge.
View error details →
Charging Error 121
Charging Error 121 means the robot docked but was unable to charge.
View error details →
Charging Error 17
Charging Error 17 means the robot may not recognize the battery as an authentic iRobot battery.
View error details →
Charging Error 19
Charging Error 19 means charging timed out.
View error details →
Charging Error 2
Charging Error 2 means a charging over-current fault has been detected.
View error details →
Charging Error 20
Charging Error 20 means the battery has a fault or is not ready to charge.
View error details →
Charging Error 21
Charging Error 21 means the robot docked but was unable to charge.
View error details →
Charging Error 3
Charging Error 3 means the robot detected a charging-system fault.
View error details →
Charging Error 4
Charging Error 4 means a no-current or low-current charging fault has been detected with the dock or robot.
View error details →
Charging Error 5
Charging Error 5 means a no-current or low-current charging fault has been detected with the dock or robot.
View error details →
Charging Error 6
Charging Error 6 means the battery temperature is outside the charging range.
View error details →
Charging Error 7
Charging Error 7 means the battery temperature is outside the charging range.
View error details →
Charging Error 8
Charging Error 8 means the robot cannot communicate with its battery.
View error details →
Charging Error 9
Charging Error 9 means a battery failure has been detected.
View error details →
Error 15
The robot detected an internal board or internal communication fault.
View error details →
Error 17
The robot encountered a navigation problem and could not complete the expected route.
View error details →
Error 2
The multi-surface rubber brushes cannot spin normally.
View error details →
Error 9
The robot detects that its bumper is continually pressed, jammed, or dislodged.
View error details →
Manufacturer information
ApplianceSignal troubleshooting information is based on manufacturer support documentation and rewritten in plain language.