KitchenAid Microwave E11 Error Code

← Back to Error Search

What it means

The microwave gas sensor reported a problem to the control board.

Try this first

Turn microwave power off at the circuit breaker.
Leave power off for 1 minute.
Restore power.
Monitor the microwave for 1 minute.
Verify normal microwave operation.

Can I keep using it?⚠ Microwave diagnostic fault

Repair usually required?⚠ Service may be required

If the error keeps returning

If E11 returns after the power reset, KitchenAid recommends qualified service.

Official source

Troubleshooting information verified against manufacturer support documentation.

View manufacturer support page →

Safety note:ApplianceSignal provides general troubleshooting information. Always follow the appliance manufacturer's safety instructions and disconnect power when required.

← Look up another error code

KitchenAid Microwave E11: Quick Answer

What it means: The microwave gas sensor reported a problem to the control board.

First thing to check

Turn microwave power off at the circuit breaker.

Can I keep using it?

Microwave diagnostic fault

Repair outlook

Service may be required

If the code remains

If E11 returns after the power reset, KitchenAid recommends qualified service.

Model note: Error-code meanings and procedures can vary by model and model year. Confirm the code against the documentation for your exact appliance before replacing parts.

Manufacturer reference: producthelp.kitchenaid.com