ERROR CODE EXPLAINED
KitchenAid Microwave
KitchenAid Microwave FC E2 Error Code
What it means
KitchenAid indicates FC E2 means the microwave could not connect to the wireless router. Possible causes listed by the manufacturer include connection timeout, poor signal strength, a failed router, the appliance Wi-Fi module, or associated wiring.
Try this first
- Turn off the microwave circuit breaker or breakers for 1 minute.
- Turn the circuit breaker or breakers back on.
- Monitor the microwave for 1 minute to make sure the error code does not return.
- Verify microwave operation.
- Reset the wireless router.
- Take another Wi-Fi capable device, such as a phone or tablet, to the microwave location and verify that it can operate there.
- If the other Wi-Fi device works correctly, disconnect power from the router for 2 minutes and then reconnect it.
- After reconnecting the router, disconnect power from the microwave for 2 minutes and then reconnect it.
- If the wireless signal at the microwave is weak, try moving the router to another location.
- If needed, use a compatible wireless signal extender or contact your Internet Service Provider.
Can I keep using it?⚠ FC E2 concerns communication between the microwave and the wireless router
Repair usually required?⚠ Check appliance power, router operation, and Wi-Fi signal strength before assuming an appliance hardware failure
If the error keeps returning
Follow the linked KitchenAid Product Help connectivity procedure if FC E2 remains.
Official source
Troubleshooting information verified against manufacturer support documentation.
View manufacturer support page →Safety note:ApplianceSignal provides general troubleshooting information. Always follow the appliance manufacturer's safety instructions and disconnect power when required.