ERROR CODE EXPLAINED

KitchenAid Wall Oven

KitchenAid Wall Oven F3 E4 Error Code

← Back to Error Search

What it means

F3 E4 can be caused by a dislodged meat probe or, on models with a powered attachment, an attachment that became unplugged.

Try this first

  1. If using the meat probe, make sure it is securely inserted in the meat-probe receptacle.
  2. If using a powered attachment, roll out the rack and make sure the attachment is in the correct location.
  3. Firmly push the roll-out rack back into the oven; a tone should sound when the rack is correctly seated.
  4. If the code remains, turn off the oven circuit breaker(s) for 1 minute.
  5. Restore power, monitor the oven for 1 minute, and verify operation.
Can I keep using it?⚠ Check probe or powered attachment
Repair usually required?⚠ Service may be required if the code returns

If the error keeps returning

If F3 E4 returns after checking the probe or powered attachment and completing the power reset, KitchenAid recommends service.

Official source

Troubleshooting information verified against manufacturer support documentation.

View manufacturer support page →
Safety note:ApplianceSignal provides general troubleshooting information. Always follow the appliance manufacturer's safety instructions and disconnect power when required.

More KitchenAid Wall Oven Codes

FC E1FC E1 means the wall oven could not connect to the wireless router. KitchenAid lists a connection timeout, weak signal, failed router, the appliance Wi-Fi module, or associated wiring as possible causes.FC E2FC E2 means the wall oven could not connect to the wireless router. KitchenAid lists a connection timeout, weak signal, failed router, the appliance Wi-Fi module, or associated wiring as possible causes.FC E3FC E3 means the wall oven could not connect to the wireless router. KitchenAid lists a connection timeout, weak signal, failed router, the appliance Wi-Fi module, or associated wiring as possible causes.FC E4FC E4 can indicate a problem with the Wi-Fi Antenna, or the associated wiring.
View all KitchenAid Wall Oven codes →
← Look up another error code

KitchenAid Wall Oven F3 E4: Quick Answer

What it means: F3 E4 can be caused by a dislodged meat probe or, on models with a powered attachment, an attachment that became unplugged.

First thing to check

If using the meat probe, make sure it is securely inserted in the meat-probe receptacle.

Can I keep using it?

Check probe or powered attachment

Repair outlook

Service may be required if the code returns

If the code remains

If F3 E4 returns after checking the probe or powered attachment and completing the power reset, KitchenAid recommends service.

Model note: Error-code meanings and procedures can vary by model and model year. Confirm the code against the documentation for your exact appliance before replacing parts.

Manufacturer reference: producthelp.kitchenaid.com

Related KitchenAid Wall Oven Error Codes

Check these other KitchenAid Wall Oven codes if the display changes or you are comparing similar faults.

F3 E3F3 E5F3 E2F3 E6F3 E1F3 E7F3 E0F3 E8F3F3 E9F03F04F2 E6F4F2 E5F4 E0
All KitchenAid Wall Oven Error CodesAll KitchenAid Appliance Error Codes

More KitchenAid Appliance Guides

Dishwasher31 codesMicrowave48 codesRange / Wall Oven11 codesRefrigerator15 codes
About these guides:SourcesHow content is organizedCorrectionsSafety