ERROR CODE EXPLAINED

KitchenAid Wall Oven

KitchenAid Wall Oven Press Cancel to Reset Error Code

← Back to Error Search

What it means

Press Cancel to Reset means the oven detected a fault or error and is asking you to clear the message.

Try this first

  1. Press CANCEL.
  2. If Call Service appears after pressing CANCEL, turn off the oven circuit breaker(s) for 1 minute.
  3. Restore power.
  4. Start a bake cycle.
  5. Monitor the oven for 1 minute and verify operation.
Can I keep using it?⚠ Fault/reset message
Repair usually required?⚠ Service may be required if the fault returns

If the error keeps returning

If Call Service or another fault returns after the reset, KitchenAid recommends troubleshooting that code or scheduling service.

Official source

Troubleshooting information verified against manufacturer support documentation.

View manufacturer support page →
Safety note:ApplianceSignal provides general troubleshooting information. Always follow the appliance manufacturer's safety instructions and disconnect power when required.

More KitchenAid Wall Oven Codes

FC E1FC E1 means the wall oven could not connect to the wireless router. KitchenAid lists a connection timeout, weak signal, failed router, the appliance Wi-Fi module, or associated wiring as possible causes.FC E2FC E2 means the wall oven could not connect to the wireless router. KitchenAid lists a connection timeout, weak signal, failed router, the appliance Wi-Fi module, or associated wiring as possible causes.FC E3FC E3 means the wall oven could not connect to the wireless router. KitchenAid lists a connection timeout, weak signal, failed router, the appliance Wi-Fi module, or associated wiring as possible causes.FC E4FC E4 can indicate a problem with the Wi-Fi Antenna, or the associated wiring.
View all KitchenAid Wall Oven codes →
← Look up another error code

KitchenAid Wall Oven Press Cancel to Reset: Quick Answer

What it means: Press Cancel to Reset means the oven detected a fault or error and is asking you to clear the message.

First thing to check

Press CANCEL.

Can I keep using it?

Fault/reset message

Repair outlook

Service may be required if the fault returns

If the code remains

If Call Service or another fault returns after the reset, KitchenAid recommends troubleshooting that code or scheduling service.

Model note: Error-code meanings and procedures can vary by model and model year. Confirm the code against the documentation for your exact appliance before replacing parts.

Manufacturer reference: producthelp.kitchenaid.com

Related KitchenAid Wall Oven Error Codes

Check these other KitchenAid Wall Oven codes if the display changes or you are comparing similar faults.

Power LossProbe / Insert ProbeLOC / LockedPUSH / PSHFeature Not AvailableSABFC E9FC E8FC E7FC E6FC E5FC E4FC E3FC E2FC E1F9 E0
All KitchenAid Wall Oven Error CodesAll KitchenAid Appliance Error Codes

More KitchenAid Appliance Guides

Dishwasher31 codesMicrowave48 codesRange / Wall Oven11 codesRefrigerator15 codes
About these guides:SourcesHow content is organizedCorrectionsSafety