LG Dryer tE5 Error Code

← Back to Error Search

What it means

The dryer detected a problem with a temperature sensor or thermistor.

Try this first

Turn the dryer off.
Unplug the dryer or turn off its circuit breaker.
While the dryer has no power, press and hold Start/Pause for about 5 seconds.
Restore power.
Try another drying cycle.

Can I keep using it?⚠ Reset the dryer before continuing

Repair usually required?⚠ Service may be required

If the error keeps returning

If the tE error returns after the dryer is reset, LG recommends requesting service.

Official source

Troubleshooting information verified against manufacturer support documentation.

View manufacturer support page →

Safety note:ApplianceSignal provides general troubleshooting information. Always follow the appliance manufacturer's safety instructions and disconnect power when required.

← Look up another error code

Related fault codes

These LG Dryer codes use the same troubleshooting path in the available guidance. Check the exact code shown on your appliance because the affected part or model-specific procedure can still differ.

LG Dryer tE5: Quick Answer

What it means: The dryer detected a problem with a temperature sensor or thermistor.

First thing to check

Turn the dryer off.

Can I keep using it?

Reset the dryer before continuing

Repair outlook

Service may be required

If the code remains

If the tE error returns after the dryer is reset, LG recommends requesting service.

Model note: Error-code meanings and procedures can vary by model and model year. Confirm the code against the documentation for your exact appliance before replacing parts.

Manufacturer reference: lg.com