ERROR CODE EXPLAINED
Maytag Dishwasher
Maytag Dishwasher Sanitize Light Flashing Error Code
What it means
Maytag says the Sanitize light flashes when the dishwasher did not meet the required sanitizing temperature, meaning the dishes were not sanitized.
Try this first
- Run the hot water for about 30 seconds and verify the water temperature is at least 120 degrees F (49 degrees C).
- Avoid opening the door or interrupting power during the Sanitize cycle.
- If a control reset is needed, disconnect dishwasher power for 30 seconds and then restore power.
Can I keep using it?Do not assume the load was sanitized while the Sanitize light is flashing.
Repair usually required?If the light continues after correcting temperature/interruptions and resetting the control, use Maytag support or service.
If the error keeps returning
Use the linked official Maytag Product Help article for the manufacturer procedure.
Official source
Troubleshooting information verified against manufacturer support documentation.
View manufacturer support page →Safety note:ApplianceSignal provides general troubleshooting information. Always follow the appliance manufacturer's safety instructions and disconnect power when required.