ERROR CODE EXPLAINED
Maytag Microwave
Maytag Microwave FC E1 Error Code
What it means
Maytag indicates FC E1 means the microwave appliance could not connect to the wireless router. The official guidance lists connection timeout, poor signal strength, a failed router, the appliance Wi-Fi module, or associated wiring as possible causes.
Try this first
- Turn off the microwave circuit breaker or breakers for 1 minute.
- Turn the circuit breaker or breakers back on.
- Monitor the microwave for 1 minute to make sure the error code does not return.
- Verify microwave operation.
- Reset the wireless router.
- Take another Wi-Fi capable device, such as a phone or tablet, to the microwave location and verify that the device operates correctly there.
- If the other Wi-Fi device works correctly, disconnect power from the router for 2 minutes and then reconnect it.
- After reconnecting the router, disconnect power from the microwave for 2 minutes and then reconnect it.
- If the wireless signal at the microwave is weak, try moving the router to a different location.
- If needed, obtain a compatible wireless signal extender or contact your Internet Service Provider.
Can I keep using it?⚠ FC E1 is associated with the microwave's connection to the wireless router
Repair usually required?⚠ Check both appliance power and the home wireless connection before assuming a microwave hardware failure
If the error keeps returning
Follow the linked Maytag Product Help article and verify router signal strength at the microwave location.
Official source
Troubleshooting information verified against manufacturer support documentation.
View manufacturer support page →Safety note:ApplianceSignal provides general troubleshooting information. Always follow the appliance manufacturer's safety instructions and disconnect power when required.