ERROR CODE EXPLAINED
Miele Cooktop
Miele Cooktop FE49 Error Code
What it means
The induction cooktop cooling fan is blocked or the appliance does not have enough cooling ventilation.
Try this first
- Check for objects or dust blocking the fan below the cooktop and remove the obstruction.
- Verify the installation clearances in the owner/installation instructions; Miele specifies at least 1/2 inch (15 mm) between the bottom of the cooktop and the interim shelf or oven.
- After correcting the airflow or clearance problem, disconnect the cooktop from power to clear the fault message.
- If the fault continues, arrange Miele service.
Can I keep using it?Follow the Miele checks that match the condition described by the appliance; not every step applies to every model or cause.
Repair usually required?Use only the manufacturer-backed checks on this page. If Miele directs the issue to service or the listed checks do not resolve it, arrange professional service.
If the error keeps returning
Use the linked official Miele support article for the exact source guidance and model-specific details.
Official source
Troubleshooting information verified against manufacturer support documentation.
View manufacturer support page →Safety note:ApplianceSignal provides general troubleshooting information. Always follow the appliance manufacturer's safety instructions and disconnect power when required.