ERROR CODE EXPLAINED
Samsung Dishwasher
Samsung Dishwasher 0C Error Code
What it means
The dishwasher detected more water inside the machine than there should be.
Try this first
- Inspect the dishwasher drain connection at the sink.
- Check the drain hose for kinks or blockage.
- Run water in the connected sink and make sure the sink drains normally.
- Clean the dishwasher drain, filter, and sump if accessible.
- Try the dishwasher again after correcting any drainage problem.
Can I keep using it?🔴 Stop and investigate
Repair usually required?⚠ Sometimes
If the error keeps returning
If the dishwasher continues to detect too much water after the drain system is checked, service may be required.
Official source
Troubleshooting information verified against manufacturer support documentation.
View manufacturer support page →Safety note:ApplianceSignal provides general troubleshooting information. Always follow the appliance manufacturer's safety instructions and disconnect power when required.