ERROR CODE EXPLAINED
Samsung Range / Wall Oven
Samsung Range / Wall Oven dC Error Code
What it means
The oven partition is not installed correctly for the selected cooking mode.
Try this first
- Turn the oven off.
- If the partition is installed, remove it and reinstall it fully.
- Make sure both sides of the partition are seated in the correct rack position for your model.
- If the partition is not installed, check that nothing is pressing against the partition switch at the back of the oven.
- Refer to the user manual to confirm that the selected cooking mode supports the partition.
Can I keep using it?⚠ Troubleshoot before continuing
Repair usually required?⚠ Usually not
If the error keeps returning
If dC continues after checking the partition and switch area, further diagnosis or service may be required.
Official source
Troubleshooting information verified against manufacturer support documentation.
View manufacturer support page →Safety note:ApplianceSignal provides general troubleshooting information. Always follow the appliance manufacturer's safety instructions and disconnect power when required.