ERROR CODE EXPLAINED
Samsung Washer
Samsung Washer 4C Error Code
What it means
The washer is not receiving water correctly.
Try this first
- Make sure both water supply valves are fully open.
- Check the hot and cold supply hoses for bends or kinks.
- Make sure hot is connected to hot and cold is connected to cold.
- Check that the drain hose is installed correctly.
- Disconnect power for about 1 minute, restore power, and try the cycle again.
- Check the washer inlet filters for debris if the problem continues.
Can I keep using it?⚠ Troubleshoot before continuing
Repair usually required?⚠ Sometimes
If the error keeps returning
If the washer still cannot fill after checking the water supply, hoses, and inlet filters, Samsung recommends requesting service.
Official source
Troubleshooting information verified against manufacturer support documentation.
View manufacturer support page →Safety note:ApplianceSignal provides general troubleshooting information. Always follow the appliance manufacturer's safety instructions and disconnect power when required.