ERROR CODE EXPLAINED
Samsung Washer
Samsung Washer 8E2 Error Code
What it means
Samsung notes that washer 8e2 can mean a jammed button on some models or a MEMS sensor error on others; use the model manual to determine which meaning applies.
Try this first
- Check the washer user manual to determine whether this code is the jammed-button or MEMS-sensor version for the model.
- For the jammed-button version, power off the washer, then touch and release each control button while working around its edges.
- If a button is damaged or the jammed-button code returns after power is restored, request Samsung service.
- For the MEMS-sensor version, power off the washer for 2 to 3 minutes, power it back on, restart the cycle, and request service if the code returns.
Can I keep using it?⚠ Samsung notes that washer 8e2 can mean a jammed button on some models or a MEMS sensor error on others; use the model manual to determine which meaning applies.
Repair usually required?⚠ Follow only the manufacturer-backed checks listed below before replacing parts.
If the error keeps returning
Use the linked official manufacturer support article for model-specific details and service guidance.
Official source
Troubleshooting information verified against manufacturer support documentation.
View manufacturer support page →Safety note:ApplianceSignal provides general troubleshooting information. Always follow the appliance manufacturer's safety instructions and disconnect power when required.