ERROR CODE EXPLAINED

Whirlpool Top Load Washer

Whirlpool Top Load Washer F2 E1 Error Code

← Back to Error Search

What it means

Whirlpool recommends resetting the top-load washer control for this code before further troubleshooting.

Try this first

  1. Disconnect the washer from its power source for 5 minutes.
  2. If the washer is plugged into an outlet, leave it unplugged for the full 5 minutes.
  3. Reconnect the washer to power.
  4. Check whether the code returns.
Can I keep using it?⚠ Try the manufacturer reset first
Repair usually required?⚠ Further troubleshooting may be needed if the code returns

If the error keeps returning

If the code returns after the 5-minute reset, use the linked Whirlpool Product Help article for the manufacturer guidance for this code.

Official source

Troubleshooting information verified against manufacturer support documentation.

View manufacturer support page →
Safety note:ApplianceSignal provides general troubleshooting information. Always follow the appliance manufacturer's safety instructions and disconnect power when required.

More Whirlpool Top Load Washer Codes

F0E2Whirlpool indicates F0 E2 means the washer detected too many suds during the cycle.F0E3Whirlpool indicates F0 E3 means the washer load is too heavy and the overload recovery cycle is running.F0E4Whirlpool indicates the washer senses that the water temperature is too hot.F0E5Whirlpool indicates F0 E5 means the load is unbalanced or too large.
View all Whirlpool Top Load Washer codes →
← Look up another error code

Related fault codes

These Whirlpool Top Load Washer codes use the same troubleshooting path in the available guidance. Check the exact code shown on your appliance because the affected part or model-specific procedure can still differ.

Whirlpool Top Load Washer F2 E1: Quick Answer

What it means: Whirlpool recommends resetting the top-load washer control for this code before further troubleshooting.

First thing to check

Disconnect the washer from its power source for 5 minutes.

Can I keep using it?

Try the manufacturer reset first

Repair outlook

Further troubleshooting may be needed if the code returns

If the code remains

If the code returns after the 5-minute reset, use the linked Whirlpool Product Help article for the manufacturer guidance for this code.

Model note: Error-code meanings and procedures can vary by model and model year. Confirm the code against the documentation for your exact appliance before replacing parts.

Manufacturer reference: producthelp.whirlpool.com

Related Whirlpool Top Load Washer Error Codes

Check these other Whirlpool Top Load Washer codes if the display changes or you are comparing similar faults.

F1 E2F2 E2F1 E1F2 E3F0E7F2 E4F0E5F2 E5F0E4F3 E1F0E3F3 E2F0E2F3 E3F0 E9F3 E5
All Whirlpool Top Load Washer Error CodesAll Whirlpool Appliance Error Codes

More Whirlpool Appliance Guides

Dishwasher31 codesDryer56 codesFront Load Washer67 codesMicrowave48 codesRange / Wall Oven11 codesRefrigerator15 codesWall Oven147 codes
About these guides:SourcesHow content is organizedCorrectionsSafety