ERROR CODE EXPLAINED
Whirlpool Top Load Washer
Whirlpool Top Load Washer F3 E2 Error Code
What it means
Whirlpool indicates F3 E2 can be related to the hot and cold inlet hoses being connected incorrectly.
Try this first
- Check whether the hot and cold inlet hoses are connected to the correct washer inlets.
- If the hoses are reversed, connect the cold water hose to the cold inlet and the hot water hose to the hot inlet.
- Make sure both the hot and cold water valves are fully open.
- Make sure both hot and cold inlet hoses are connected to the washer.
- Disconnect the washer from its power source for 5 minutes.
- If the washer is plugged into an outlet, leave it unplugged for the full 5 minutes.
- Reconnect the washer to power.
- Check whether the code returns.
Can I keep using it?⚠ Check the hot and cold inlet hose connections first
Repair usually required?⚠ Further diagnosis may be needed if F3 E2 returns after the hose and water-supply checks
If the error keeps returning
If F3 E2 returns after checking the hose connections, water valves, and completing the 5-minute reset, use the linked Whirlpool Product Help article.
Official source
Troubleshooting information verified against manufacturer support documentation.
View manufacturer support page →Safety note:ApplianceSignal provides general troubleshooting information. Always follow the appliance manufacturer's safety instructions and disconnect power when required.