ERROR CODE EXPLAINED
Whirlpool Top Load Washer
Whirlpool Top Load Washer F9E1 Error Code
What it means
The washer is taking too long to drain.
Try this first
- Check the drain hose for kinks or blockage.
- Make sure the drain hose is installed at the correct depth in the standpipe.
- Do not tape over the drain opening.
- Check the household drain or utility sink for blockage.
- Restart the washer after correcting the drainage problem.
Can I keep using it?⚠ Troubleshoot before continuing
Repair usually required?⚠ Sometimes
If the error keeps returning
If the washer still cannot drain after the hose and household drain are checked, Whirlpool recommends service.
Official source
Troubleshooting information verified against manufacturer support documentation.
View manufacturer support page →Safety note:ApplianceSignal provides general troubleshooting information. Always follow the appliance manufacturer's safety instructions and disconnect power when required.