ERROR CODE EXPLAINED

Whirlpool Top Load Washer

Whirlpool Top Load Washer Fd Error Code

← Back to Error Search

What it means

Whirlpool identifies Fd as Factory Default. It indicates that the washer was returned to factory-default settings.

Try this first

  1. Press POWER/CANCEL, then select the Drain & Spin cycle.
  2. Within 5 seconds, press Extra Rinse, Fabric Softener, Extra Rinse, Fabric Softener in that order.
  3. When entered correctly, confirm that Fd appears for about 3 seconds and the washer returns to Standby Mode.
Can I keep using it?The washer can be used normally after it returns to Standby Mode.
Repair usually required?Use Whirlpool support if the control does not return to normal operation after the factory-default procedure.

If the error keeps returning

Use the linked official manufacturer Product Help article for the complete manufacturer procedure.

Official source

Troubleshooting information verified against manufacturer support documentation.

View manufacturer support page →
Safety note:ApplianceSignal provides general troubleshooting information. Always follow the appliance manufacturer's safety instructions and disconnect power when required.

More Whirlpool Top Load Washer Codes

F0E2Whirlpool indicates F0 E2 means the washer detected too many suds during the cycle.F0E3Whirlpool indicates F0 E3 means the washer load is too heavy and the overload recovery cycle is running.F0E4Whirlpool indicates the washer senses that the water temperature is too hot.F0E5Whirlpool indicates F0 E5 means the load is unbalanced or too large.
View all Whirlpool Top Load Washer codes →
← Look up another error code

Whirlpool Top Load Washer Fd: Quick Answer

What it means: Whirlpool identifies Fd as Factory Default. It indicates that the washer was returned to factory-default settings.

First thing to check

Press POWER/CANCEL, then select the Drain & Spin cycle.

Can I keep using it?

The washer can be used normally after it returns to Standby Mode.

Repair outlook

Use Whirlpool support if the control does not return to normal operation after the factory-default procedure.

If the code remains

Use the linked official manufacturer Product Help article for the complete manufacturer procedure.

Model note: Error-code meanings and procedures can vary by model and model year. Confirm the code against the documentation for your exact appliance before replacing parts.

Manufacturer reference: producthelp.whirlpool.com

Related Whirlpool Top Load Washer Error Codes

Check these other Whirlpool Top Load Washer codes if the display changes or you are comparing similar faults.

F9E1Fill or Sensing Light OnF8E1HCF8 E6LdF8 E3LdLF8 E2LdUF7 E9LFF7 E7LidF7 E6Lid Light Flashing
All Whirlpool Top Load Washer Error CodesAll Whirlpool Appliance Error Codes

More Whirlpool Appliance Guides

Dishwasher31 codesDryer56 codesFront Load Washer67 codesMicrowave48 codesRange / Wall Oven11 codesRefrigerator15 codesWall Oven147 codes
About these guides:SourcesHow content is organizedCorrectionsSafety