ERROR CODE EXPLAINED

Whirlpool Wall Oven

Whirlpool Wall Oven SAB Error Code

← Back to Error Search

What it means

SAB means Sabbath Mode is enabled. In this mode, Bake remains available while other cooking and cleaning modes, tones, timers, and many controls are disabled.

Try this first

  1. Cancel or disable Sabbath Mode using the procedure for your specific model.
  2. If needed, use the owner manual for the exact enable/disable sequence.
  3. Verify that normal controls, tones, and cooking modes return after Sabbath Mode is disabled.
Can I keep using it?✅ Sabbath Mode active
Repair usually required?✅ No

If the error keeps returning

SAB should clear after Sabbath Mode is disabled. If it does not, check the model-specific owner manual or contact Whirlpool.

Official source

Troubleshooting information verified against manufacturer support documentation.

View manufacturer support page →
Safety note:ApplianceSignal provides general troubleshooting information. Always follow the appliance manufacturer's safety instructions and disconnect power when required.

More Whirlpool Wall Oven Codes

FC E1FC E1 means the wall oven could not connect to the wireless router. Whirlpool lists connection timeout, weak signal, router trouble, the oven Wi-Fi module, or related wiring as possible causes.FC E2FC E2 means the wall oven could not connect to the wireless router. Whirlpool lists connection timeout, weak signal, router trouble, the oven Wi-Fi module, or related wiring as possible causes.FC E3FC E3 means the wall oven could not connect to the wireless router. Whirlpool lists connection timeout, weak signal, router trouble, the oven Wi-Fi module, or related wiring as possible causes.FC E4FC E4 can indicate a problem with the Wi-Fi Antenna, or the associated wiring.
View all Whirlpool Wall Oven codes →
← Look up another error code

Whirlpool Wall Oven SAB: Quick Answer

What it means: SAB means Sabbath Mode is enabled. In this mode, Bake remains available while other cooking and cleaning modes, tones, timers, and many controls are disabled.

First thing to check

Cancel or disable Sabbath Mode using the procedure for your specific model.

Can I keep using it?

Sabbath Mode active

Repair outlook

No

If the code remains

SAB should clear after Sabbath Mode is disabled. If it does not, check the model-specific owner manual or contact Whirlpool.

Model note: Error-code meanings and procedures can vary by model and model year. Confirm the code against the documentation for your exact appliance before replacing parts.

Manufacturer reference: producthelp.whirlpool.com

Related Whirlpool Wall Oven Error Codes

Check these other Whirlpool Wall Oven codes if the display changes or you are comparing similar faults.

Registration ErrorSabbath ModePUSH / PSHProbe / Insert ProbePress Cancel to ResetPower LossLOC / LockedFeature Not AvailableFC E9FC E8FC E7FC E6FC E5FC E4FC E3FC E2
All Whirlpool Wall Oven Error CodesAll Whirlpool Appliance Error Codes

More Whirlpool Appliance Guides

Dishwasher31 codesDryer56 codesFront Load Washer67 codesMicrowave48 codesRange / Wall Oven11 codesRefrigerator15 codesTop Load Washer64 codes
About these guides:SourcesHow content is organizedCorrectionsSafety