Amana Microwave Error Codes

Amana indicates AccuPop Fail means the microwave oven could not execute the function and there may be a problem with the AccuPop Sensor.

Amana indicates dOn means Demo Mode is on and dOff means Demo Mode has been turned off.

Amana indicates a DOOR or OPEN/CLOSE DOOR message can appear when the microwave door has remained closed for 5 minutes or more without the microwave being started.

Amana indicates E03 means the Keypad (User Interface) reported a problem to the control board; the keypad, user interface, or associated wiring may be involved.

Amana indicates E11 means the Gas Sensor reported a problem to the control board; the Gas Sensor or associated wiring may be involved.

Amana indicates E12 means there is a problem with the Gas Sensor or associated wiring.

Amana indicates E13 means the microwave oven did not preheat correctly; the Appliance Control Board or associated wiring may be involved.

Amana indicates E21 means the Thermal Sensor circuit reported an open condition to the control board; the Thermal Sensor, Appliance Control Board, or associated wiring may be involved.

Amana indicates E22 means the Thermal Sensor circuit reported a short to the control board; the Thermal Sensor, Appliance Control Board, or associated wiring may be involved.

Amana indicates E23 means the microwave oven did not reach its preheat temperature within 30 minutes; the Heater, Appliance Control Board, or associated wiring may be involved.

Amana indicates E24 means the microwave oven reached an overheat condition of 500 F (260 C); the Thermal Sensor, Gas Sensor, Appliance Control Board, or associated wiring may be involved.

Amana indicates E61 means the Oven Sensor circuit reported an open condition to the control board; the Sensor, Appliance Control Board, or associated wiring may be involved.

Amana indicates E62 means the Oven Sensor circuit reported a shorted condition to the control board; the Sensor, Appliance Control Board, or associated wiring may be involved.

Amana indicates E63 means the official Product Help article reports a shorted Oven Sensor circuit condition to the control board; the Sensor, Appliance Control Board, or associated wiring may be involved.

Amana indicates the oven could not execute the function; there may be a problem with the Relay Control Board, or the associated wiring.

Amana indicates the oven could not execute the function; there may be a problem with the Appliance Control Board, or the associated wiring.

Amana indicates that the Keypad (User Interface) reported a problem to the control board and that the Keypad or associated wiring may be involved.

Amana indicates this code may be associated with the User Interface / Keypad or the associated wiring.

Amana indicates this code may be associated with the Vent Fan and Light Switch (located on the lower left front side panel) or the associated wiring.

Amana indicates this code may be associated with the Vent Fan and Light Switch (located on the lower left front side panel) or the associated wiring.

Amana indicates this code may be associated with the User Interface (Touchpad) or the associated wiring.

Amana indicates this code may be associated with the Cavity Temperature Thermistor or the associated wiring.

Amana indicates this code may be associated with the Humidity Thermistor or the associated wiring.

Amana indicates this code may be associated with the Humidity Sensor or the associated wiring.

Amana indicates this code may be associated with the User Interface Thermistor or the associated wiring.

Amana indicates this code may be associated with the Convection Thermistor or the associated wiring.

Amana indicates this code may be associated with the Hood Temperature Thermistor or the associated wiring.

Amana indicates this code may be associated with the Magnetron Temperature Thermistor or the associated wiring.

Amana indicates this code may be associated with the Cavity Temperature Thermistor or the associated wiring.

Amana indicates this code may be associated with the Humidity Thermistor or the associated wiring.

Amana indicates this code may be associated with the Smart Pop Control or the associated wiring.

Amana indicates the oven could not execute the function; there may be a problem with the Relay Control Board, or the associated wiring.

Amana indicates the oven could not execute the function; there may be a problem with the Appliance Control Board, or the associated wiring.

Amana indicates the oven could not execute the function; there may be a problem with the Appliance Control Board, or the associated wiring.

Amana lists F7 E9 as an official microwave diagnostic code.

Amana indicates the oven could not execute the function; there may be a problem with the Exhaust Air Temperature Sensor, or the associated wiring.

Amana indicates the oven could not execute the function; there may be a problem with the Appliance Control Board, the Relay Control Board, or the associated wiring.

Amana's official F9Q Product Help article provides a power-reset procedure but does not identify a specific failed component in the published guidance.

Amana indicates the oven could not execute the function; there may be a problem with the User Interface (Touch Pad) or the associated wiring.

Amana indicates this connected-appliance code can occur when the appliance cannot connect to the router because of a timeout, weak signal, router problem, Wi-Fi module problem, or associated wiring.

Amana indicates this connected-appliance code can occur when the appliance cannot connect to the router because of a timeout, weak signal, router problem, Wi-Fi module problem, or associated wiring.

Amana indicates this connected-appliance code can occur when the appliance cannot connect to the router because of a timeout, weak signal, router problem, Wi-Fi module problem, or associated wiring.

Amana indicates FCE7 when the appliance did not connect to the router.

The microwave detected a connected-appliance, registration, communication, or electronic control condition.

Amana indicates LOC, L, or the padlock icon means the microwave Control Lock feature is enabled.

Amana indicates that a flashing colon or PF can follow a power failure or occur when the clock time has been turned off.

Amana identifies this code with the Keypad (User Interface) or the associated wiring.