ERROR CODE EXPLAINED
Cove Dishwasher
Cove Dishwasher 30 01 14 Error Code
What it means
Cove identifies error 300114 as the Clean Filter reminder indicating that the dishwasher sump filtration system needs to be cleaned.
Try this first
- Clean the sump filter using the Cove dishwasher filter-removal and cleaning instructions.
- Turn the home circuit breaker to the dishwasher off for 30 seconds, then turn it back on.
- Retest dishwasher operation.
- Clean the filter regularly; heavy use may require more frequent cleaning.
- The Clean Filter message appears after 30 cycles as a reminder and is not based on the actual soil level of the filter.
- After the door is opened, there is a 30-second delay before the Clean Filter message appears. Starting a new wash cycle during that delay can defer the message until the next cycle finishes.
- If the issue remains, refer to the Cove Use and Care Guide or contact Factory Certified Service.
Can I keep using it?✅ Error 300114 is a scheduled Clean Filter reminder for the sump filtration system
Repair usually required?✅ Clean the sump filter and preserve Cove's 30-cycle and 30-second-delay behavior
If the error keeps returning
Use the linked Cove support article and Use and Care Guide if the Clean Filter message cannot be resolved.
Official source
Troubleshooting information verified against manufacturer support documentation.
View manufacturer support page →Safety note:ApplianceSignal provides general troubleshooting information. Always follow the appliance manufacturer's safety instructions and disconnect power when required.