ERROR CODE EXPLAINED
Miele Dishwasher
Miele Dishwasher F600 Error Code
What it means
The AutoDos dispensing system is blocked and the dishwasher has canceled the wash program.
Try this first
- Switch the dishwasher off.
- Remove and clean the lower spray arm, then reinstall it so the filter combination lies flat, the lock indicator aligns correctly, and the spray arm rotates freely.
- Open AutoDos and remove the PowerDisk. Keep moisture out of the inside of the AutoDos system while cleaning.
- On AutoDos 1.0, remove the PowerDisk holder by the yellow tabs, clean the housing and holder with a damp cloth, remove and clean the fill channel with water and a soft brush, dry all parts, and reinstall the channel until the pull tab clicks; align the holder arrows and make sure the holder lies flat.
- On AutoDos 2.0, use the yellow pull tab while lifting the holder, clean the housing and holder with a damp cloth, dry all parts, then reinstall the holder with the arrows aligned and the holder lying flat.
- Insert a full PowerDisk so it sits flush, make sure the seals are clean, and close/lock the AutoDos lid tightly so moisture cannot reach the detergent.
- If the fault continues, arrange Miele service.
Can I keep using it?Use the AutoDos 1.0 or AutoDos 2.0 procedure that matches your dishwasher.
Repair usually required?Use only the manufacturer-backed checks on this page. If Miele directs the issue to service or the listed checks do not resolve it, arrange professional service.
If the error keeps returning
Use the linked official Miele support article for the exact source guidance and model-specific details.
Official source
Troubleshooting information verified against manufacturer support documentation.
View manufacturer support page →Safety note:ApplianceSignal provides general troubleshooting information. Always follow the appliance manufacturer's safety instructions and disconnect power when required.