ERROR CODE EXPLAINED
Miele Dishwasher
Miele Dishwasher F69 Error Code
What it means
The dishwasher circulation pump may be dry, stuck, or jammed after a long period of non-use or first commissioning.
Try this first
- Remove the filter combination.
- Use caution with hot water. Add 1 liter of water no hotter than 165 F (75 C) with 3 to 5 drops of rinse aid and let it soak for 5 minutes.
- Restart the program and repeat the soak procedure 2 to 3 times if needed.
- If a technical fault is suspected, switch the dishwasher off, wait a few seconds, switch it on, select the desired program with the Program button, and press Start/Stop.
- If the fault continues, arrange Miele service.
Can I keep using it?Follow the Miele checks that match the condition described by the appliance; not every step applies to every model or cause.
Repair usually required?Use only the manufacturer-backed checks on this page. If Miele directs the issue to service or the listed checks do not resolve it, arrange professional service.
If the error keeps returning
Use the linked official Miele support article for the exact source guidance and model-specific details.
Official source
Troubleshooting information verified against manufacturer support documentation.
View manufacturer support page →Safety note:ApplianceSignal provides general troubleshooting information. Always follow the appliance manufacturer's safety instructions and disconnect power when required.