ERROR CODE EXPLAINED
Miele Dishwasher
Miele Dishwasher Water Inlet Fault Error Code
What it means
The dishwasher is not receiving the expected water supply.
Try this first
- Open the water faucet fully.
- If the inlet filter is dirty, switch the dishwasher off, unplug it, close the faucet, remove/rinse/reinstall the inlet filter and seal correctly, then reconnect the water valve.
- Open the faucet slowly and tighten the connection if it leaks.
- Remove any kinks or loops from the inlet hose and replace the hose if damaged.
- Miele lists flow pressure below 4.35 psi (0.3 bar) as too low; contact the facility manager or a plumber.
- If the fault continues, arrange Miele service.
Can I keep using it?Follow the Miele checks that match the condition described by the appliance; not every step applies to every model or cause.
Repair usually required?Use only the manufacturer-backed checks on this page. If Miele directs the issue to service or the listed checks do not resolve it, arrange professional service.
If the error keeps returning
Use the linked official Miele support article for the exact source guidance and model-specific details.
Official source
Troubleshooting information verified against manufacturer support documentation.
View manufacturer support page →Safety note:ApplianceSignal provides general troubleshooting information. Always follow the appliance manufacturer's safety instructions and disconnect power when required.