ERROR CODE EXPLAINED
Miele Washer
Miele Washer F10 Error Code
What it means
The washer water inlet is blocked or restricted.
Try this first
- Stop the current wash program and open the water faucet.
- If the inlet filter is dirty, close the faucet, disconnect the inlet hose, remove and clean the filter, reinstall it correctly, reconnect the hose, then open the faucet and check for leaks.
- Remove any kinks or loops from the water inlet hose and replace a damaged hose.
- With the faucet fully open, Miele expects at least 5 L of water in 15 seconds; contact the facility manager or a plumber if the supply is below this level.
- If water pressure cannot be increased enough, contact Miele Service.
Can I keep using it?Follow the Miele checks that match the condition described by the appliance; not every step applies to every model or cause.
Repair usually required?Use only the manufacturer-backed checks on this page. If Miele directs the issue to service or the listed checks do not resolve it, arrange professional service.
If the error keeps returning
Use the linked official Miele support article for the exact source guidance and model-specific details.
Official source
Troubleshooting information verified against manufacturer support documentation.
View manufacturer support page →Safety note:ApplianceSignal provides general troubleshooting information. Always follow the appliance manufacturer's safety instructions and disconnect power when required.