ERROR CODE EXPLAINED
Miele Washer
Miele Washer F138 Error Code
What it means
The Miele Waterproof System detected a leak and water is present in the drip tray.
Try this first
- Close the water inlet and disconnect the washer from power; this stops the drain pump.
- Before reaching into the drum, make sure the drum is completely stationary.
- If laundry must be removed, use the emergency release: open the drain-pump access panel, unlock the door with a screwdriver, and pull the door open.
- Contact Miele Service to remove the water and repair the leak.
Can I keep using it?Follow the Miele checks that match the condition described by the appliance; not every step applies to every model or cause.
Repair usually required?Use only the manufacturer-backed checks on this page. If Miele directs the issue to service or the listed checks do not resolve it, arrange professional service.
If the error keeps returning
Use the linked official Miele support article for the exact source guidance and model-specific details.
Official source
Troubleshooting information verified against manufacturer support documentation.
View manufacturer support page →Safety note:ApplianceSignal provides general troubleshooting information. Always follow the appliance manufacturer's safety instructions and disconnect power when required.